Manual Triple-Track Retractable Shade Canopy for Pergolas & Pavilions - Custom Sizes - 8' / 8' / Gray B&W
Shade Canopy FAQ
Will it fit my existing pergola, porch, or patio?
Yes — every canopy is custom-fit to your specific structure, including older, hand-built, or non-standard pergolas, porches, and patio covers. Send us a few photos or measurements and we'll figure out the fit together — no structure is too old or too custom.
Why choose a manual triple-track system over a motorized one?
No motor, wiring, remote, or batteries to ever fail — just a smooth, one-handed glide. The triple-track design keeps the fabric taut, so it runs true and stays looking sharp over time, at a lower cost and with less maintenance than a motorized system.
Is it easy to install?
Yes — mounting brackets attach directly to your pergola, pavilion, or porch joists, and each canopy arm locks in with a retaining pin. Everything needed is included (hardware, spacer blocks, Allen wrench) — just a drill and basic hand tools.
How does the retractable canopy operate?
Hook the included control rod onto the eye bolt and slide the canopy open or closed along the triple-track system. Turn the eye bolt to tighten once positioned — no motor or electronics involved.
What is the canopy fabric made of?
Premium Sunbrella fabric — fade-, mildew-, and stain-resistant, and engineered to withstand rain, wind, and UV rays. Available in several standard colors and patterns, with additional designs available for an upcharge.
How long will it take to get my canopy?
Every canopy is built to order specifically for your structure. Production and shipping via common carrier freight take approximately 5-6 weeks from when you place your order. Need a custom size or shape? Just contact us for a price.
What is it made from and where is it built?
Commercial-grade stainless steel fasteners and aluminum beams, sourced in the USA and hand-crafted by skilled Amish builders — backed by reliable dealer support and friendly local service.
Is it wind-resistant?
Yes — the heavy-duty fabric and track system have been tested for wind resistance so panels won't flap, fray, or blow loose during seasonal storms.
Can I add retractable side walls too?
Yes — retractable side walls are available as an add-on, letting you create a pergola with a fully retractable roof and side walls for complete weather and privacy control.
Still have questions? Call or text us at 732-806-7959 — tell us about your pergola, porch, or patio (even if it's older or hand-built) and we'll help you find the right fit.
Questions & Answers
Have a Question?
-
Looking for a quality manually operated canopy for an existing pergola 18..3’ x 22’. Do you have that size available?
Sure, thanks for sending over the photos of you existing pergola,F or a space this size, we recommend splitting it into two canopies — an 11' and an 18.3' — rather than one continuous 18.3' x 22' piece. Running it as two separate canopies reduces the risk of sagging over that long a span and holds up better long-term. we may adjust exactly how it's split, or you can add a 2x8 beam to support the middle track if you'd prefer to keep it closer to one continuous run. We can build a single 18.3' x 22' canopy if you'd rather go that route, but we don't recommend it for this size
-
I am thinking on what is the best way to handle my situation here with the canopy as I do not have the support beams running the width I want it to open and close ? I might be able to come up with some special brackets to actually hang the rail from the bottom of the beams. let me know if that would work
We can walk you through how to add a proper support beam across that span, which is the most straightforward fix. Or, if you'd rather hang the rail from your existing beams, you can pick up mounting brackets from a local hardware store and get creative with the setup — just note that we don't supply a bracket-hanging mechanism ourselves, so that part would be on you to source and install. E
-
Can you please provide me with the exact dimensions of the drive beam and the side guide rails (not the lengths, as I know those are customize to my needs). Also, I believe I understood Allen to say that the canopy arm hangs 3.5" below the top of the drive beam. Can you confirm that? The video you provide was a big help, but do you have written installation instructions?
I am glad the video was a help and thanks for providing the photos of your existing pergola, I sent the measurements and you can see them in the product photos above as well. The canopy arm does hang 3.5" below the top of the drive beam approx, it may vary or you could specify a lenght if you want.